Repairs to uPVC Windows

uPVC is a fantastic choice for modern homes. They are easy to maintain and durable, as well as long-lasting. As opposed to aluminium and timber they do not rust or rot.

It is crucial to wash and oil UPVC doors and windows on a regular basis. This will save you from unnecessary repair costs and also improve the efficiency of energy.

1. Broken Glass

If the glass in your window is broken it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good shape.

Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. However, if you have double-pane windows that are anchored by internal beading it will be more difficult to remove the existing panes and install new ones. In this instance, it is necessary to purchase plastic spacers in order to make sure that the new pane fits into the window frame.

If you're planning to attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment, including thick gloves and eye protection. It is also an excellent idea to lay down a dropcloth before you begin working on the glass, so that any shards fall on the fabric rather than on the floor where they could be trampled upon and cause further damage.

Once the glass has been removed from the window, it's best to cover the gap with clear packaging tape or duct tape to block water and drafts from getting into the home until a professional comes out and fix the window. This will also provide an obstruction to prevent intruders from getting into your home. If the gap is large, you may want to consider using the security door with an integrated window as it will provide the best of both worlds.

2. Sagging

Upvc windows and doors are an affordable, durable and energy-efficient alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues, including sagging. A sagging window in uPVC can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are falling down.

Repositioning the hinges could help fix a window that is sagging. First, you'll need to unblock the windows so you can reach the frame. After that, using an screwdriver, take off the hinges on the top and bottom and adjust them by turning them clockwise or counter-clockwise. Once you've adjusted the hinges, close the window repairs and test it for fit. If you're happy with the fit, tighten the screws until they remain in the right place.

If you cannot reposition the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out which causes their tightness to decrease. It is crucial to replace your seal as soon as you can in order to keep your uPVC window watertight and draughtproof.

UPVC handles can also become loose. This is typically caused by screws that have loosened over time, but it could also be due to the mechanism of the handle getting worn out. It's fairly simple to repair a loose uPVC handle. First, you'll need to close the window and perform an experiment fitting. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle and turn the mechanism back into position.

3. Water Leaks

If you're waking up to wet floors and damp walls every time it rains it's crucial to take action. Water leaks from windows not only lead to the degrading of the structure of your home but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.

This is an easy fix that can be accomplished by anyone who is a DIYer with the skills. Depending on the severity of the issue the old caulking may require removal before a new layer of caulk is applied. It is essential to keep in mind that when it comes to uPVC window repairs, do not be tempted to apply too much caulk and then make the area more difficult to clean and could decrease the efficiency of your energy usage.

Verify that the drainage holes do not have debris in them and that the sill pan is properly angled to drain away from the window. In more serious situations, you might have to consider replacing the window.

Moldy sills and rotten ones are also signs of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the home.

If the leakage occurs between the double glazed window repairs near me-glazed glass, it is more likely the problem is related to the seal, not the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.

4. Faulty Hinges

Hinges could be the reason when your uPVC window is difficult to open or if it opens in a breeze. They can be repaired by any DIYer who is skilled and can be completed in a matter of minutes.

Most households in the UK will have top-hung or side hung uPVC windows that are hinged and, just like any mechanical component they can wear down over time. It's very simple to replace a hinge on a window repair near me but it's much easier if someone helps you to hold the frame.

It is also important to ensure that the uPVC hinges are opened and closed in the correct direction. You can check this by looking for the arrows on each hinge, this indicates which way the window should be opened.

The issue could be caused either due to opening the window in the wrong way or a faulty installation at the factory. This can often be resolved by sending us a photograph through our website and we will be pleased to offer you suggestions.

Regularly lubricating the hinges is essential. Applying a light engineering lubricant to the hinges is a good method of doing this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the risk of a window getting stuck and stop corrosion. Ideally, you should do this at least once a year. WD40 and other solvent-based oils are not recommended because they could damage parts of your uPVC window.

5. Draughts

Draughts in upvc windows can be caused by a few various factors. The hinges may also become misaligned due to wear, creating gaps where the sash and frame meet. This can be easily repaired by giving them a good cleaning, but if they are beyond repair it might be necessary to get them re-aligned or replaced. In addition, the interlock could be misaligned. This is located on the hinge side and could require to be cleaned. In some cases it is possible to replace the hinges.

The next common reason for draughts is window seals. These can become worn down or damaged over time, and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with low-emissivity glass. which will help regulate indoor temperatures and will lessen draughts.

Another, and most effective methods to reduce drafts is to use an draught excluder. These are typically made of fabric filled with some sort of filler and can be placed on the windowsill on top. They will help keep cold air out and keep your home warm and cozy!

With a little regular maintenance and repair windows made of Upvc window repair will provide excellent security and insulation for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be cheaper to replace them rather than repair them. If you encounter any issues with your window made of upvc, it's best to consult an expert as soon as you can.