Fitting a Cat Flap > 자유게시판

• 목록
• 답변
• 글쓰기
• 게시판 리스트 옵션
  • 수정
  • 삭제

Fitting a cat flap can be a bit daunting, but it is fairly simple with the proper instructions. Decide how high you'd like the flap to be (normally it's at belly height). Mark this point on the door cat flap and then use the template as a reference to drill.

If you have a kitten that is still a baby then gently prop the door slightly open and invite it to go through. Reward the kitten every time it passes.

Take a measurement of the door

A cat flap is an excellent method to allow your pet to come and go in and out of your home whenever it pleases. This can help keep your cat healthy by making sure that it is exercising and also being able to go back in if it is trapped outside in bad weather, especially in winter. This can reduce the time you allow your cat in or out and also make your home safe by letting you know when it's gone.

It is important to make sure that the cat flap is installed correctly to stop your pet from being forced through or escaping through it by other animals (e.g. dogs). It is essential to measure your pet's belly height and the doorway of your house in order to make sure that the flap is at the correct height. If your cat is a little longer or taller than the normal, you can adjust the position of the flap by moving it up or down by a tiny amount.

The next step is to make use of a spirit level to mark the centre of the door that you will put the flap. Then, using the mark as an indication, cut out the contour of the flap using the aid of a jigsaw. Once you have cut out the door, sand the edges of the door to create smooth surfaces. You can then drill any fixing holes that are needed.

The process of installing a cat flap isn't as complicated as you think, and it shouldn't take more than two hours to finish the entire task from start to the end. However, the process can be a little more complicated if you need to fit it into a upvc door panel replacement cat flap or composite door because these doors come in a wide range of thicknesses which can affect how the holes are cut and what they are fixed to. This is why we always recommend calling an expert to do the work, particularly if you have never worked with glass before.

Measure Your Cat

A cat flap can save you from listening to your pet's meow for you to let it in or out. This is particularly helpful if your cat is trapped inside during the winter months when you are at work.

It is crucial to measure your cat first before you attempt the installation. Although it might appear to be an easy task, it is crucial to measure the right way or your cat will be unable to use.

Firstly, make sure your cat is relaxed and not anxious prior to taking the measurements. You'll need to keep them in a manner that they cannot move and make sure that the measuring tape or ruler is flat against their body, not bending in any way. You can get an accurate measurement by keeping the measuring tape or the ruler flat against the body of the animal from the top to the bottom.

Once you've determined your cat's measurements, it's time to look at the door to decide where to put the flap. Place the flap at the level of your cat's belly. This will allow them to walk through the door without much effort. This will also stop the flap from making a lot of noise as it swings open and shut.

You will need to consider the thickness of the uPVC or composite door too. While timber doors are all of a similar thickness, uPVC and composite doors can be very different in their overall construction, which can make fitting the cat flap more difficult as you will need to ensure that the hole you make is the proper size for your pet.

It is also worthwhile studying the instructions that come with the cat flap kit to find an outline of the template that can be used to mark out the location of the hole inside the door. This will help you determine where the hole needs to be placed and ensure that the template is set properly on the door. Using a spirit level to ensure that the template is in a straight line against the door can be very helpful.

Cut the Flap

You'll need to make an opening in the door to accommodate your cat flap installation cost flap before you can put it in place. This is a difficult task and it is recommended that you seek out the assistance of a professional cat flap fitting service for this step should you not have the expertise or knowledge to complete the task yourself. You can also consult the instructions included in the kit to find out how to do it right.

You can take the height of your cat's or kitten's stomach to guide you. As a general rule you should place the flap approximately 10-15 centimeters above the ground. This is the typical height of the stomach for cats. This will allow your cat to pass through the flap easily and make it difficult for other cats or naughty neighbours to enter or exit.

Once you have determined the location where the cat flap needs to be positioned, mark this location on the door using the help of a pencil. If your kit has a template put it on top of the door. Use the marks on the template to drill holes at each corner. After that, you'll be able to cut out the template and replace it with the Cat Flap (Qooh.Me).

If you are installing your cat flap in a door made from wood or uPVC, you are able to do it yourself if you are confident enough to use using a jigsaw. Be sure to not cut through any of the door's mullions or vertical rails. You can use a Jigsaw to cut your panel into a square or a circle according to the way you'd like to cut it. Be patient and don't force the jigsaw into cutting faster.

After the hole has been cut and the flap is firmly positioned, carefully place the flap of cat food into its new location and make sure that it is firmly fixed. If it features caps for screws, then put these onto the screws that protrude. Once the screws are in place, sand any rough edges of the cut then apply sealant around any gaps to ensure that there aren't any draughts entering into your home.

Install the Flap

If you have an ordinary cat flap, you can try to encourage your pet to go through it by placing a small amount of cat food on the top of the door. Alternatively you can try pushing the cat through using your hands or with a stick. Once your cat is accustomed to walking through the flap it will be capable of walking through the flap as it pleases. This will allow you to let it in and out as it wants.

You can install an animal flap inside the UPVC or glass doors although this may not be as simple as fitting it into a wooden external door because the upvc door panel cat flap doors and some glass doors aren't a uniform thickness. This can have a significant impact on how you cut the opening for the flap and can also affect whether your flap fits correctly once it's installed.

Depending on the model of cat flap you pick, it may be equipped with a mounting kit and a template that will show exactly where to drill holes for it. If the kit doesn't come with a template, you can make one yourself. When cutting, it is important to keep the jigsaw from being pushed too hard so that you don't create a bigger hole than necessary in your door.

Most cat flaps are square or rectangular in shape but there are also some which are circular, and are typically more difficult to fit. If you have a circular flap, it is essential to ensure that the hole is in the right position on your door, because if it's not, the cat will not be able to use the flap and could be stranded out in the sun all day (or even at night).

Certain models of cat flaps have locks that permit you to control when your cat comes in and goes. These can be very useful when you're worried about your cat going out at night and coming back in because of the darkness, or you're at work for the entire day. Certain locks can be used for entrance or exit, while others can be locked both ways. This is useful for sick or elderly cats who aren't keen to go outside in bad weather.